药群论坛

标题: PDA技术报告清单(官网2015年更新) [打印本页]

作者: 朵朵7    时间: 2015-5-24 08:20 AM
标题: PDA技术报告清单(官网2015年更新)

PDA技术报告清单(官网2015年更新)  

2015-05-22

PDA技术报告清单


    
1 Validation of Moist Heat Sterilization  Processes: Cycle Design, Development, Qualification and Ongoing Control  Revised 2007(Published 1980)
湿热灭菌工艺验证:循环设计、研发、确认和持续控制,修订2007

3 Validation of Dry Heat Processes Used  for Depyrogenation and Sterilization Revised 2013 (Published 1981) 01003 43506
用于除热源和灭菌的干热工艺验证,修订2013

4 Design Concepts for the Validation of  Water-for-Injection Systems 1983
注射用水系统验证的设计概念,1983

5 Sterile Pharmaceutical Packaging:  Compatibility and Stability 1984  
无菌制剂包装:相容性和稳定性,1984

7 Depyrogenation 1985  
除热源,1985

9 Review of Commercially Available  Particulate Measurement Systems 1988  
商业可采购的颗粒物检测系统审核,1988

10 Parenteral Formulations of Proteins and  Peptides: Stability and Stabilizers 1988  
蛋白质和多肽注射制剂:稳定性和稳定剂,1988

11 Sterilization of Parenterals by Gamma  Radiation 1988  
静脉注射伽马辐射灭菌,1988

12 Siliconization of Parenteral Drug  Packaging Components 1988  
静脉注射剂药品包装组分硅化处理,1988

13 Fundamentals of an Environmental  Monitoring Program Revised 2014 (Published 1990)
环境监测计划原则,修订2014

14 Validation of Column-Based  Chromatography Processes for the Purification of Proteins Revised 2008 (Published 1992)
蛋白纯化用柱色谱工艺验证,修订2008

15 Validation of Tangential Flow Filtration  in Biopharmaceutical Applications Revised 2009 (Published 1992)
生物制药用正切流过滤验证,修订2009

16 Effect of Gamma Irradiation on  Elastomeric Closures 1992  
人造橡胶塞伽马辐射效应,1992

17 Current Practices in the Validation of  Aseptic Processing -- 1992 1993
无菌工艺验证现行规范,1992,1993

18 Report on the Validation of  Computer-Related Systems 1995  
计算机相关系统验证报告,1995

19 Rapid/Automated ID Methods Survey 1990  
快速/自动ID方法调查,1990

20 Report on Survey of Current Industry  Gowning Practices 1990  
行业现行更衣规范调查报告,1990

21 Bioburden Recovery Validation 1990  
生物负载回收率验证,1990

22 Process Simulation for Aseptically  Filled Products Revised 2011(Published 1996)
无菌灌装药品工艺模拟,修订2011

23 Industry Survey on Current Sterile  Filtration Practices 1996  
现行无菌过滤实践行业调查,1996

24 Current Practices in the Validation of  Aseptic Processing – 1996 1996  
无菌工艺验证现行规范,1996

25 Blend Uniformity Analysis: Validation  and In-Process Testing 1997  
混合均一性分析:验证和中控测试,1997

26 Sterilizing Filtration of Liquids  Revised 2008 (Published 1998)
液体无菌过滤,修订2008

27 Pharmaceutical Package Integrity 1998  
药品包装完整性,1998

28 Process Simulation Testing for Sterile  Bulk Pharmaceutical Chemicals Revised 2006 (Published 1998)
无菌散装药用化学物工艺模拟测试,修订2006

29 Points to Consider for Cleaning  Validation Revised 2012 (Published 1998)
清洁验证的考虑要点,修订2012

30 Parametric Release of Pharmaceuticals  and Medical Device Products Terminally Sterilized by Moist Heat Revised 2012 (Published 1999)
最终湿热灭菌的药物和医疗器械参数放行,修订2012

31 Validation and Qualification of  Computerized Laboratory Data Acquisition Systems 1999  
计算机化实验室数据获取系统验证和确认,1999

32 Auditing of Suppliers Providing Computer  Products and Services for Regulated Pharmaceutical Operations Revised 2004 (Published 1999)
提供受法规管理的药物操作用计算机产品和服务的供应商审计,修订2004

33 Evaluation, Validation and  Implementation of Alternative and Rapid Microbiological Methods Revised 2013 (Published 2000)
替代性和快速微生物方法的评估、验证和实施,修订2013

34 Design and Validation of Isolate Systems  for the Manufacturing and Testing of Health Care Products 2001  
保健药品的生产和检测分离系统的设计和验证,2001

35 A Proposed Training Model for the  Microbiological Function in the Pharmaceutical Industry 2001
制药行业微生物功能培训模式建议,2001

36 Current Practices in the Validation of  Aseptic Processing – 2001 2002  
无菌工艺验证的现行规范--2001,2002

38 Manufacturing Chromatography Systems  Post-Approval Changes: (ChromPAC):Chemistry, Manufacturing and Controls  Documentation 2006  
批准后生产用色谱系统:研发、生产和控制文件,2006

39 Guidance for Temperature-Controlled  Medicinal Products: Maintaining the Quality of Temperature-Sensitive  Medicinal Products through the Transportation Environment 2007  
温度受控药物指南:通过运输环境来维护对温度敏感的药物的质量,2007

40 Sterilization Filtration of Gases 2005  
气体的无菌过滤,2005

41 Virus Filtration 2008  
病毒过滤,2008

42 Process Validation of Protein  Manufacturing 2005  
蛋白质生产的工艺验证,2005

43 Identification and Classification of  Nonconformities in Molded and Tubular Glass Containers for Pharmaceutical  Manufacturing Revised 2013 (Published 2007)
药物生产用模型制备和管式玻璃容器的识别和分类,修订2013

44 Quality Risk Management for Aseptic  Processes 2008  
无菌工艺的质量风险管理,2008

45 Filtration of Liquids Using  Cellulose-Based Depth Filters 2008  
使用纤维素基础深层过滤器的液体过滤,2008

46 Last Mile: Guidance for Good  Distribution Practices for Pharmaceutical Products to the End User 2009
最终里程:给最终用户的药物优良销售规范指南,2009

47 Preparation of Virus Spikes Used for  Virus Clearance Studies 2010  
用于病毒清除研究的病毒加标样制备,2010

48 Moist Heat Sterilizer Systems: Design,  Commissioning, Operation, Qualification and Maintenance 2010
湿热灭菌系统:设计、调试、运行、确认和维护,2010

49 Points to Consider for Biotechnology  Cleaning Validation 2010  
生物制品清洁验证考虑要点,2010

50 Alternative Methods for Mycoplasma  Testing 2010  
支原体测试替代性方法,2010

51 Biological Indicators for Gas and  Vapor-Phase Decontamination Processes: Specification, Manufacture, Control  and Use 2010
气体和蒸汽相除污染工艺生物指示剂:质量标准、生产、控制和使用,2010

52 Guidance Good Distribution Practices for  the Pharmaceutical Supply Chain 2011  
药品供应链优良销售规范指南,2011

53 Guidance for Industry: Stability Testing  to Support Distribution of New Drug Products 2011  
行业指南:支持新药销售的稳定性测试,2011

54 Implementation of Quality Risk  Management for Pharmaceutical and Biotechnology Manufacturing Operations 2012
药品和生物制品生产操作的质量风险管理实施,2012

54-2 Implementation of Quality Risk  Management for Pharmaceutical and Biotechnology Manufacturing Operation:  Annex 1: Case Study Examples for Quality Risk Management in Packaging and  Labeling 2013  
药品和生物制品生产操作的质量风险管理实施,附录1:包装和标识中的质量风险管理案例研究,2013

54-3 Implementation of Quality Risk  Management for Pharmaceutical and Biotechnology Manufacturing Operations  Annex 2: Case Studies in the Manufacturing of Pharmaceutical Drug Products  2013
药品和生物制品生产操作的质量风险管理实施,附录2:药品生产中的质量风险管理案例研究,2013

54-4 Implementation of Quality Risk  Management for Pharmaceutical and Biotechnology Manufacturing Operations  Annex 3: Case Studies in the Manufacturing of Biotechnological Bulk Drug  Substances 2015  
药品和生物制品生产操作的质量风险管理实施,附录3:生物散装药用物质生产中的质量风险管理案例研究,2013

55 Detection and Mitigation of  2,4,6-Tribromoanisole and 2,4,6-Trichloroanisole Taints and Odors in the  Pharmaceutical and Consumer Healthcare Industries 2012  
药物和保健行业中2,4,6-三溴苯甲醚和2,4,6-三氯苯甲醚污染和气味的检测和移除,2012

56 Application of Phase-Appropriate Quality  Systems and CGMP to the Development of Therapeutic Protein Drug Substance  2012  
治疗用蛋白质药用物质研发中与阶段相适当的质量体系和CGMP应用,2012

57 Analytical Method Validation and  Transfer for Biotechnology Products 2012  
生物制品的分析方法验证和转移,2012

58 Risk Management for  Temperature-Controlled Distribution 2012  
温度受控销售风险管理,2012

59 Utilization of Statistical Methods for  Production Monitoring 2012  
生产监测用统计学方法使用,2012

60 Process Validation: A Lifecycle Approach  2013
工艺验证:生命周期方法,2013

61 Steam In Place 2013  
就地蒸汽,2013

62 Recommended Practices for Manual Aseptic  Processes 2013
人工无菌工艺规范建议,2013

63 Quality Requirements for the  Extemporaneous Preparation of Clinical Trial 2013  
临床试验临时制备药物的质量要求,2013

64 Active Temperature-Controlled Systems:  Qualification Guidance 2013  
在用温度控制系统:确认指南,2013

65 Technology Transfer 2014  
技术转移,2014

66 Application of Single-Use Systems in  Pharmaceutical Manufacturing 2014  
药物生产中单次使用系统的应用,2014

67 Exclusion of Objectionable  Microorganisms from Nonsterile Pharmaceuticals, Medical Devices, and  Cosmetics 2014  
非无菌药物、医疗器械和化妆品中致病菌排除,2014

68 Risk-Based Approach for Prevention and  Management of Drug Shortages 2014
基于风险的药品存贮预防和管理,2014

http://zhuyujiao1972.blog.163.com/blog/static/986947272015422114516951/


作者: ruichao2005    时间: 2015-5-24 09:31 AM
学习学习!!!!!
作者: XPWaneta    时间: 2017-2-9 10:55 AM
您好,请问您那有PDA TR73吗




欢迎光临 药群论坛 (http://yaoqun.net/) Powered by Discuz! X3.2